Installation/Upgrade - GE 489 Instruction Manual

3 USER INTERFACES
a) CHECKING IF INSTALLATION/UPGRADE IS REQUIRED
If 489PC is already installed, run the program and use the following procedure to check if it needs upgrading:
1. While 489PC is running, insert the GE Multilin Products CD and allow it to autostart (alternately, load the D:\index.htm
file from the CD into your default web browser), OR
Go to the GE Multilin website at www.GEindustrial.com/multilin (preferred method)
2. Click the "Software" menu item and select "489 Generator Management Relay" from the list of products shown.
3. Verify that the version shown is identical to the installed version (see below). The Help > About 489PC menu item dis-
plays the current version of 489PC.
GE Multilin 489 Generator Management Relay
3.2 SOFTWARE INTERFACE

3.2.2 INSTALLATION/UPGRADE

If these two versions do not match,
then the 489PC software must
be upgraded.
808745A1.CDR
3
3-5