Yamaha YZ125(T)/T1 Owner's Service Manual page 474

SWINGARM
3. Install:
9 Bearing 1
9 Oil seal 2
To connecting rod.
NOTE:
9 Apply the molybdenum disulfide grease on the
bearing when installing.
9 Install the bearing by pressing it on the side hav-
ing the manufacture's marks or numbers.
Installed depth of bearings a a :
5 mm (0.20 in)
EC5751B3
Swingarm
1. Install:
9 Bush 1
9 Thrust bearing 2
9 Oil seal 3
Collar 4
9
To swingarm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bushes, thrust bearings, oil seal lips and contact
surfaces of the collar and thrust bearing.
2. Install:
9 Collar 1
9 Washer 2
To relay arm 3.
NOTE:
Apply the molybdenum disulfide grease on the
collars and oil seal lips.
3. Install:
9 Collar 1
To connecting rod 2.
NOTE:
Apply the molybdenum disulfide grease on the
collar and oil seal lips.
5-57
CHAS