Yamaha YZ125(T)/T1 Owner's Service Manual page 230

CARBURETOR AND REED VALVE
4-9
EC466030
HANDLING NOTE
cC
Do not disassemble the venturi block 1 1
and main nozzle 2 2 because it will cause a
drop in carburetor performance.
EC463000
REMOVAL POINTS
EC463110
Throttle valve
1. Remove:
9 Throttle valve 1
9 Ring 2
9 Spring (throttle valve) 3
9 Mixing chamber top 4
9 Throttle cable 5
NOTE:
While compressing the spring (throttle valve),
disconnect the throttle cable.
EC464000
INSPECTION
EC464140
Carburetor
1. Inspect:
9 Carburetor body
Contamination ¡ Clean.
cC
When cleaning the main air passage a a , do
not blow air at the filter side because it will
clog the passage with mud or sand.
NOTE:
9 Use a petroleum based solvent for cleaning.
Blow out all passages and jets with com-
pressed air.
9 Never use a wire.
9 When cleaning the main air passage, blow air
through it while covering the nozzle with a
clean rag.
ENG