Yamaha YZ125(T)/T1 Owner's Service Manual page 346

å
∫
CRANKCASE AND CRANKSHAFT
∫
5. Install:
9 Crankcase (right) 1
Use the crankshaft installing tool 2, 3, 4.
Crankshaft installing tool:
Pot 2:
Bolt 3:
Adapter 4: YM-01499/90890-01499
ÅFor USA and CDN
ıExcept for USA and CDN
NOTE:
9Use two plain washers (Yamaha genuine:
90201-243K3) 5 or the ones of a size as
shown one on the other. (Except for USA and
CDN)
9Install so that the plain washers do not deviate
from the crankshaft center. (Except for USA
and CDN)
9 When installing the crankcase, the connecting
rod should be positioned at TDC (top dead
center).
9Install while checking that the dowel pin is in
place.
6. Install:
9 Clamp 1
9 Bolt (crankcase) 2
NOTE:
Tighten the crankcase tightening bolts in stage,
using a crisscross pattern.
7. Install:
9 Holder 1
9 Bolt (holder) 2
4-67
ENG
YU-90050/90890-01274
YU-90050/90890-01275
14 Nm (1.4 m•kg, 10 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)