Yamaha YZ125(T)/T1 Owner's Service Manual page 300

KICK AXLE, SHIFT SHAFT AND PRIMARY DRIVE
GEAR
5. Install:
9 Crankcase cover (right) 1
NOTE:
Mesh the governor gear 2, and impeller shaft
gear 3 with primary drive gear 4.
6. Install:
9 Bolt [crankcase cover (right)] 1
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
7. Install:
9 Kick starter 1
9 Plain washer 2
9 Bolt (kick starter) 3
NOTE:
Install the kick starter closest to but not contact-
ing the pillar tube 4.
8. Install:
9 Shift pedal 1
9 Bolt (shift pedal) 2
NOTE:
Align the upper line a of the shift pedal with the
center b of the crankcase projection and rotate
the shift pedal counterclockwise until it first
engages. Then install the shift pedal.
4-44
ENG
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
12 Nm (1.2 m•kg, 8.7 ft•lb)