Yamaha YZ125(T)/T1 Owner's Service Manual page 124

1 Brake hose
2 Master cylinder
3 "ENGINE STOP" button lead
4 "ENGINE STOP" button
5 Throttle cable
6 Clutch cable
7 Clamp
8 Cable guide
CABLE ROUTING DIAGRAM
A Install the brake hose so that its pipe portion
directs as shown and lightly touches the
projection on the master cylinder.
B Pass the "ENGINE STOP" button lead in
the middle of the clutch holder.
C Clamp the "ENGINE STOP" button lead to
the handlebar to 3 clicks.
D Pass the brake hose in front of the number
plate and through the cable guide.
2-17
SPEC