Yamaha YZ125(T)/T1 Owner's Service Manual page 296

KICK AXLE, SHIFT SHAFT AND PRIMARY DRIVE
GEAR
4. Install:
9 Bolt (shift guide) 1
EC4C5301
Shift shaft
1. Install:
9 Roller 1
9 Shift shaft 2
NOTE:
Apply the transmission oil on the roller and shift
shaft.
EC4B5302
Kick axle assembly
1. Install:
9 Kick gear 1
9 Plain washer 2
9 Torsion spring 3
To kick axle 4.
NOTE:
Make sure the stopper a of the torsion spring
fits into the hole b on the kick axle.
2. Install:
9 Spring guide 1
NOTE:
Slide the spring guide into the kick axle, make
sure the groove a in the spring guide fits on the
stopper of the torsion spring.
3. Install:
9 Kick axle assembly 1
NOTE:
9 Apply the transmission oil on the kick axle.
9 Slide the kick
crankcase, make sure the clip 2 and kick axle
stopper a fit into their home positions b, c.
4-42
ENG
10 Nm (1.0 m•kg, 7.2 ft•lb)
axle assembly into the