Yamaha YZ125(T)/T1 Owner's Service Manual page 464

STEERING
9. Install:
9 Steering shaft cap 1
10. After tightening the nut, check the steering for
smooth movement. If not, adjust the steering
by loosening the ring nut little by little.
11. Adjust:
9 Front fork top end a
Front fork top end (standard) a a :
5 mm (0.20 in)
12. Tighten:
9 Pinch bolt (handle crown) 1
9 Pinch bolt (under bracket) 2
cC
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
5-52
CHAS
23 Nm (2.3 m•kg, 17 ft•lb)
20 Nm (2.0 m•kg, 14 ft•lb)