Yamaha YZ125(T)/T1 Owner's Service Manual page 120

1 "ENGINE STOP" button lead
2 C.D.I. magneto lead
3 Ignition coil lead
4 Ground lead
5 Positioning tape
6 Protection tube
7 C.D.I.unit
8 Throttle cable
9 Clutch cable
0 Side core
q Radiator breather hose
CABLE ROUTING DIAGRAM
A Pass the high tension cord to
the left of the radiator hose.
B Clamp
to the
"ENGINE STOP" button lead
and C.D.I. magneto
Clamp them in front of the radi-
ator fitting boss.
C Clamp to the frame the throttle
cable, clutch cable and ignition
coil lead.
D Pass the C.D.I. magneto lead
and radiator breather
between the frame and the
right side of the radiator.
E Insert the C.D.I. unit band until
it stops at the C.D.I. unit stay.
F Pass the C.D.I. magneto lead
and radiator breather
between the frame and the
radiator hose.
2-15
G Locate the clamp ends in the
arrowed range.
frame the
lead.
hose
hose
SPEC