Rear Shock Absorber Installation - Yamaha YZ250(R)/LC Owner's Service Manual

REAR SHOCK ABSORBER
3. Adjust:
9 Spring length (installed) a
251 mm (9.88 in)
*261 mm (10.28 in)
*For EUROPE
NOTE:
The length of the spring (installed) changes 1.5
mm (0.06 in) per turn of the adjuster.
cC
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
4. Tighten:
9 Locknut 1
EC5852B5
Rear shock absorber
1. Install:
9 Dust seal 1
9 O-ring 2
9 Collar 3
NOTE:
9Apply the molybdenum disulfide grease on the
bearing.
9Apply the lithium soap base grease on the dust
seals, O-rings and collars.
2. Install:
9 Bush 1
9 Collar 2
9 Dust seal 3
NOTE:
9Apply the molybdenum disulfide grease on the
bearing.
9Apply the lithium soap base grease on the
bush, collars and dust seals.
9Install the dust seals with their lips facing out-
ward.
5-63
CHAS
Spring length (installed) a a :
Standard
length
240.5~258.5 mm
*255.5~273.5 mm
(10.06~10.77 in)
Extent of
adjustment
(9.47~10.18 in)