Kick Idle Gear Installation - Yamaha YZ250(R)/LC Owner's Service Manual

KICK AXLE, SHIFT SHAFT AND PRIMARY DRIVE GEAR
3. Install:
9 Spring guide 1
NOTE:
Slide the spring guide into the kick axle, make
sure the groove a in the spring guide fits on the
stopper of the torsion spring.
4. Install:
9 Plain washer 1
9 Kick axle assembly 2
NOTE:
9 Apply the molybdenum disulfide grease on the
contacting surfaces of the kick axle stopper a
and stopper plate 3.
9 Apply the transmission oil on the kick axle.
9 Slide the kick axle assembly into the crankcase
and make sure the kick axle stopper fits into
the stopper plate.
5. Hook:
9 Torsion spring 1
NOTE:
Turn the torsion spring clockwise and hook into
the proper hole a in the crankcase.
EC4C5420
Kick idle gear
1. Install:
9 Kick idle gear 1
9 Plain washer 2
9 Circlip 3
NOTE:
9 Apply the transmission oil on the kick idle gear
inner circumference.
9 Install the kick idle gear with its depressed side
a toward you.
4-46
ENG