Yamaha YZ250(R)/LC Owner's Service Manual page 120

1 Clutch cable
2 Cable guide
3 Ground lead
4 Clamp
5 Wireharness
6 High tension cord
7 Ignition coil
8 Radiator breather hose
9 "ENGINE STOP" button lead
0 Throttle cable
q Engine bracket
CABLE ROUTING DIAGRAM
A Pass the clutch cable into the
cable guide.
B Clamp the clutch cable, high
tension cord and wireharness at
the protector of the high tension
cord so that the clamp passes
with its ends downward, as
shown.
C Position the CDI magneto lead
coupler between the radiators.
D Clamp the wireharness to the
right engine bracket.
E Clamp the high tension cord,
throttle cable and wireharness
with the clamp ends downward,
so that the high tension cord
does not contact the engine
bracket installation nuts.
2-15
SPEC
F Fasten the ground lead together
with the front installation portion
of the ingnition coil.
G Pass the radiator breather hose
at the rear of the radiator hose
and in front of the ignition coil
bracket.
H Position the throttle cable,
"ENGINE STOP" button lead
and clutch cable as shown.