Rear Caliper Installation - Yamaha YZ250(R)/LC Owner's Service Manual

FRONT BRAKE AND REAR BRAKE
2. Install:
9 Copper washer 1
9 Union bolt 2
w
Always use new copper washers.
cC
Install the brake hose so that its pipe por-
tion a a directs as shown and lightly touch-
es the projection b b on the caliper.
3. Install:
9 Brake hose holder 1
9 Caliper 2
9 Bolt (caliper) 3
NOTE:
Fit the brake hose holder cut a over the projec-
tion b on the front fork and clamp the brake
hose.
4. Tighten:
9 Pad pin 4
5. Install:
9 Pad pin plug 5
EC5A5121
Rear caliper
1. Install:
9 Pad support 1
9 Brake pad 2
9 Pad pin 3
NOTE:
9 Install the brake pads with their projections
a into the caliper recesses b.
9 Temporarily tighten the pad pin at this point.
5-18
CHAS
30 Nm (3.0 m•kg, 22 ft•lb)
23 Nm (2.3 m•kg, 17 ft•lb)
18 Nm (1.8 m•kg, 13 ft•lb)
3 Nm (0.3 m•kg, 2.2 ft•lb)