Handlebar Removal - Yamaha YZ250(R)/LC Owner's Service Manual

EC5B0000
HANDLEBAR
4 Nm (0.4 m•kg, 2.9 ft•lb)
Extent of removal:
Extent of removal
Preparation for
removal
1

1 Handlebar removal

Order Part name
HANDLEBAR REMOVAL
Number plate
1 Clutch cable
2 Clutch lever holder
3 "ENGINE STOP" button
4 Master cylinder
5 Throttle cable cap
6 Throttle cable
7 Throttle
8 Cap cover
9 Collar
10 Grip (left)
11 Handlebar holder (upper)
12 Handlebar
HANDLEBAR
1 Nm (0.1 m•kg, 0.7 ft•lb)
9 Nm (0.9 m•kg, 6.5 ft•lb)
Q'ty
1
1
1
1
1
1
1
1
1
1
2
1
5-39
CHAS
28 Nm (2.8 m•kg, 20 ft•lb)
2 Nm (0.2 m•kg, 1.4 ft•lb)
4 Nm (0.4 m•kg, 2.9 ft•lb)
Remarks
Remove the clamp portion only.
Disconnect at the lever side.
Refer to "REMOVAL POINTS".
Turn over the cap cover.
Disconnect at the throttle side.
Loosen the bolts.
Refer to "REMOVAL POINTS".