D-6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Removing and Replacing the Drive Caddy Assembly
4. Connect the power and interface cables at the rear of the module.
5. If the Base Module is a desktop model, replace the skin cover as
described in "Removing and Replacing the Skin Cover (Desktop Models
Only)."
Figure D-3. Removing the cover plate
The drive caddy assembly is an enclosure that holds one or two DLT drives
and the interconnecting cables. The assembly includes the SCSI interface
connectors and cables for the Base Module, the power cables for the drives,
and communication cables from the drives to the controller PWB.
SHR-1721