GTS and line rate configuration commands
GTS configuration commands
display qos gts interface
Syntax
display qos gts interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display qos gts interface to view generic traffic shaping (GTS) configuration information and
operational statistics on a specified interface or all the interfaces.
If no interface is specified, this command displays the GTS configuration information and operational
statistics on all the interfaces.
Examples
# Display the GTS configuration information and operational statistics on all the interfaces.
<Sysname> display qos gts interface
Interface: GigabitEthernet1/0/1
Rule(s): If-match queue 2
CIR 640 (kbps), CBS 40960 (byte)
Table 25 Command output
Field
Interface
Rule(s)
Description
Interface type and interface number
Match criteria
70