Terminating The Connection To The Remote Sftp Server; Setting The Dscp Value For Packets Sent By The Sftp Client; Sftp Client Configuration Example - HP 6125G Configuration Manual

Step
2. Display a list of all commands
or the help information of an
SFTP client command.

Terminating the connection to the remote SFTP server

Step
1. Enter SFTP client view.
Terminate the connection to
2.
the remote SFTP server and
return to user view.

Setting the DSCP value for packets sent by the SFTP client

A field in an IPv4 or IPv6 header contains 8 bits and is used to identify the service type of an IP packet.
In an IPv4 packet, this field is called "Type of Service (ToS)." In an IPv6 packet, this field is called "Traffic
class." According to RFC 2474, the ToS field is redefined as the differentiated services (DS) field, where
a DSCP value is represented by the first six bits (0 to 5) and is in the range 0 to 63. The remaining two
bits (6 and 7) are reserved. When a packet is being transmitted, the network devices can identify its
DSCP value, and determines the transmission priority of the packet according to the DSCP value.
To set the DSCP value for packets sent by the SFTP client:
Step
1. Enter system view.
2. Set the DSCP value for
packets sent by the SFTP
client.

SFTP client configuration example

Network requirements
As shown in
SFTP client, needs to log in to Switch B for file management and file transfer. Use publickey authentication
and the RSA public key algorithm.
Figure 60, an SSH connection is required between Switch A and Switch B. Switch A, an
Command
help [ all | command-name ]
Command
For more information, see
"Establishing a connection to the
SFTP server."
•
bye
•
exit
•
quit
Command
system-view
•
Set the DSCP value for IPv4
packets sent by the SFTP client:
sftp client dscp dscp-value
•
Set the DSCP value for IPv6
packets sent by the SFTP client:
sftp client ipv6 dscp dscp-value
205
Remarks
N/A
Remarks
Execute the command in user view.
Use any of the commands.
These three commands function in
the same way.
Remarks
N/A
Optional.
By default, the DSCP value is 16 in
IPv4 packets sent by the SFTP client
and is 8 in IPv6 packets sent by the
SFTP client.