Ⅵ. Operations; Set The Vertical System - Tenma 72-7910 Manual

Ⅵ. Operations
Until now, you have had basic understanding about the vertical, horizontal, and trigger
system controls of the oscilloscope. We recommend you to re‐read the "Functions"
section if you are still not familiar with the basic operation controls.
In this section, you will learn different settings related to the oscilloscope:
1. Set the Vertical System
(CH1, CH2, MATH, REF, OFF)
2. Set the Horizontal System
(MENU or HORI MENU)
3. Set the Trigger System
(MENU, TRIG MENU, 50% and FORCE)
4. Set the Acquire System (ACQUIRE)
5. Set the Display System (DISPLAY)
6. Set the Storage and Load System (STORAGE)
7. Set the Utility System (UTILITY)
8. Set the Measurement Parameters (MEASURE)
9. Set the Cursor Measurement (CURSOR)
10. System Message Examples and Troubleshooting
It is suggested to read this section carefully to understand multiple measuring functions and
system operation methods of the oscilloscope.
1. Set the Vertical System
Each channel for the oscilloscope can be set independently on the vertical system menu.
After pressing CH1 or CH2 function key, the system shall display function menu of CH1 or
CH2 channel. See Table 2‐1 below for description.
Table 2‐1
Model 72‐7610/72‐10510 User Manual
18