Tenma 72-10175 User Manual page 104

Selectable Analog
Bandwidth Limit(typical)
Lower Frequency Response(-3dB)
Rise Time at BNC(typical)
DC Gain Accuracy
Trigger
Trigger Source
Trigger Mode
Trigger Type
Trigger Sensitivity
Trigger Level Range
Trigger Level Accuracy
Edge Trigger
Edge Trigger Slope
Pulse Width Trigger
Trigger Condition
Pulse Width Range
Video Trigger
Signal Formats and Field
Rates, Video Trigger Type
Alternative Trigger
CH1
CH2
CH3
CH4
20MHz
” 10Hz(at input BNC)
5.8ns
±3%
CH1,CH2,CH3, CH4,EXT
Auto, Normal and Single
Edge, Pulse, Video, Alternative
0.02 div increments
±4V
±4 division
Rising, Falling
Trigger when < (Less than), > (Greater than), =
(Equal), or  (Not Equal); Positive pulse or
Negative pulse
Selectable from 20ns to 10s
Supports NTSC, PAL and SECAM broadcast
systems for any field or any line
Internal Trigger: Edge, Pulse Width, Video
Internal Trigger: Edge, Pulse Width, Video
Internal Trigger: Edge, Pulse Width, Video
Internal Trigger: Edge, Pulse Width, Video
TENMA 72-10175
DIGITAL OSCILLOSCOPE