Measure Signal - Tenma 72-10175 User Manual

TENMA 72-10175
DIGITAL OSCILLOSCOPE

Measure Signal

Cursor Menu
Click "Cursor" in main menu
This method allows you to take measurements by moving the cursors
1. Source
The user can set the source to CH1, CH2, CH3,CH4 and MATH.
When you use cursors, be sure to set the Source to the waveform on the display that
you want to measure.
2. Type
There are four types of cursors: Cross, Trace, Vertical and Horizontal
1) Cross
The Cross cursors appear as cross lines on the display and measure the vertical and