Table of Contents
Advertisement
Trigger Type: Set the Trigger Type to Edge or Pulse.
PW Condition: Set the PW Condition to the following condition.
+More
: +Pulse width more than set pulse condition.
+Less
: +Pulse width less than set pulse condition.
+Equal
: +Pulse width equal to set pulse condition.
-More
: -Pulse width more than set pulse condition.
-Less
: -Pulse width less than set pulse condition.
-Equal
: -Pulse width equal to set pulse condition.
Pulse Width: The Pulse Width adjust range is 10ns~10s. When the condition is met, it
will trigger and acquire the waveform.
The user can also change the trigger setting on trigger panel in sidebar.
Advertisement
Table of Contents
