Zoom In/Out And Drag Waveforms - Tenma 72-10175 User Manual

Zoom In/Out and Drag Waveforms

The software will stop updating waveform after the user clicks " Stop " button,
The user can change the waveform display by adjusting the scale and position. When
you change the scale, the waveform display will increase or decrease in size. When you
change the position, the waveform will move up, down, right, or left.
The channel reference indicator identi¿es each waveform on the display. The indicator
points to the reference level of the waveform record.
Zoom In/Out
The user can click "Zoom In/Out" in "Acquire" menu, then left or right click the mouse
button on display screen to zoom in/out the waveform. Also the user can change Time/
Div in Horizontal menu or in Horizontal panel to zoom in/out the waveform.
Drag
The user can modify the waveform position after clicked "Drag" in "Acquire" menu fol-
lowing the following steps.