Table of Contents
Advertisement
If necessary, use a non-metallic tool to adjust the trimmer capacitor of the probe for
the Àattest square wave being displayed on the oscilloscope.
Repeat if necessary.
WARNNING: To avoid electric shock while using the probe, be sure the perfection of the
insulated cable, and do not touch the metallic portions of the probe head while it is con-
nected with a voltage source.
Function Check
Perform this functional check to verify that your oscilloscope is operating correctly.
Connect the oscilloscope
You should connect the A-Type Plug of USB cable to your PC USB port and connect
the B-Type Plug of USB cable to oscilloscope USB port.
Under Compensated
TENMA 72-10175
DIGITAL OSCILLOSCOPE
Advertisement
Table of Contents
