Appendix B - Tenma 72-10175 User Manual

Tenma 72 SERIES
DIGITAL OSCILLOSCOPE
Appendix B: General Maintenance
General Care
Do not store or leave the oscilloscope where the device will be exposed to direct sunlight
for long periods of time.
Caution
To avoid damages to the device or probes, do not expose them to sprays, liquids or
solvents.
Cleaning
Inspect the device and probes as often as operating conditions require. Make sure to
disconnect from all power sources.
To clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the oscilloscope and probes with a lint-free cloth.
Use care to avoid scratching.
2. Use a soft cloth to clean the device.
Caution
To avoid damages to the surface of the device or probes not use any abrasive or chemi-
cal cleaning agents.