Installing The Solid Rear Doors - HP 10000 G2 Series Installation Manual

Using a T-25 Torx driver, insert and tighten four M6 machine screws into each corner hole (3).
b.

Installing the solid rear doors

Using a T-25 Torx driver, insert and tighten two screws into each of the upper and lower rear door lock
1.
catches.
Install the hinges brackets.
2.
Align the eight hinge brackets that you removed from the rear of your rack to the designated
a.
locations on the rear extension assembly (1).
Rack Air Duct kit 97