Removing The Rear Doors; Removing The Side Panels - HP 10000 G2 Series User Manual

Removing the rear doors

Unlock the doors and open them.
1.
Open the hinge brackets (1) by pulling up on the top hinge pin and pulling down on the bottom
2.
hinge pin for each door.
Lift the rear doors off of the hinge brackets, and remove them from the rack (2). Store the doors in an
3.
upright position, taking care to protect them from damage.

Removing the side panels

NOTE: The side panels come preinstalled on all HP 10622 G2 Racks.
Preparing the rack for component installation 13