Light Kit; About This Device; Kit Contents; Required Tool - HP 10000 G2 Series Installation Manual

Rack options
Hide thumbs Also See for HP 10000 G2 Series:
Table of Contents

Advertisement

Light kit

About this device

The HP Light kit enables you to add a light to the rack.

Kit contents

Item
110V/220V light assembly
Light cover
F14W/133-T8 fluorescent lamp
Power cord (10 ft), C13-C14
Mounting screws
This kit might contain extra hardware for your convenience.

Required Tool

You will need a flat-head screwdriver.

Important safety information

Before installing this product, read the Important Safety Information guide provided.
WARNING:
exceed the recommended voltage for the rack.
WARNING:
lamp may require special handling.
WARNING:
The leveling feet are extended to the floor.
The full weight of the rack rests on the leveling feet.
The stabilizing feet are attached to the rack if it is a single-rack installation.
The racks are coupled together in multiple-rack installations.
Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any reason.
Quantity
1
1
1
1
2
To reduce the risk of personal injury, fire, or damage to the equipment, do not
The fluorescent lamp contains mercury. Therefore, at end-of-life, the fluorescent
To reduce the risk of personal injury or damage to the equipment, be sure that:
Light kit 76

Advertisement

Table of Contents
loading

Table of Contents