Table of Contents
Advertisement
Secure the opposite end of the cable management arm to the rack using two M6 x 12 pan HD screws
7.
and M6 external washers.
Installation is complete.
Using the 100 Kilo Sliding Shelf
Use the handle on the front of the sliding shelf to slide it in and out of the rack. When sliding the shelf back
into the rack, there may be resistance. Apply pressure as needed to fully move the shelf into the rack.
IMPORTANT:
the rack.
Be sure to secure all rack mount system components when moving the shelf out of
100 Kilo Sliding Shelf kit 16
Advertisement
Table of Contents
