Installing The Switch In A Rack Using The San Switch Rack Mount Kit - HP 158222-B21 - StorageWorks Fibre Channel SAN Switch 8 Installation Instructions Manual

Installing the Switch in a Rack Using the SAN Switch
Rack Mount Kit
This section provides instructions for installing the SAN Switch 2/32, SAN
Switch 2/16, or SAN Switch 2/8 in an HP System/e rack, or in an HP 9000 Series
or comparable EIA rack using the SAN Switch Rack Mount Kit, part number
331148-B21.
Figure 1: SAN Switch 2/16 rack-mounted switch
Note:
The following items are required to install the switch in a rack:
8
The Rack Mount Kit installation requires one technician to install a SAN switch.
SAN Switch 2/32, SAN Switch 2/16, or SAN Switch 2/8
Power cables
#2 Phillips screwdriver
7/16-inch wrench or socket
The SAN Switch Rack Mount Kit rails and rail mounting hardware listed
next:
SAN Switch Rack Mount Kit Installation Instructions