Table of Contents
Advertisement
Heavy Duty Stabilizer kit
About this device
The HP Heavy Duty Stabilizer kit provides stability and support and prevents possible tipping when you
install, remove, or access equipment within the rack.
If you have a stand-alone rack with a single rack-mountable component that exceeds 99.8 kg (220 lb) or if
you have three or fewer bayed racks with a single rack-mountable component that exceeds 99.8 kg (220 lb),
you must use the heavy duty stabilizer.
Kit contents
Item
Heavy duty front stabilizer mount
Heavy duty stabilizer feet
M8 x 16-mm bolt
M8 x 30-mm bolt
M8 flat washer
This kit might contain extra hardware for your convenience.
Required tools
The following tools are required for installation:
•
Ratchet with sockets
•
Adjustable wrench
Installing the rack stabilizer option kit
Install the front stabilizer mount.
1.
Align the front stabilizer mount to the mounting holes on the rack front caster plate.
a.
Quantity
1
2
8
2
10
Heavy Duty Stabilizer kit 69
Advertisement
Table of Contents
