Table of Contents
Advertisement
Place the other end of the same grounding strap over the grounding lug on the egress slot.
3.
Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the egress slot
4.
and tighten.
From the rack to a building facility, contact your building supervisor for more information. The following
figure illustrates parts for this step.
Reference
Item
48.26-cm (19-in) mounting rail (the mounting hole is
1
located at the top or bottom of the rail)
M8 hex nut
2
M8 Belleville toothed washer
3
Facility ground (not included with this kit)
4
M8 x 20 bolt
5
Ground Bonding kit 66
Advertisement
Table of Contents
