Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the perforated
4.
panel and tighten.
From the grounding lug on the fan kit to the grounding lug on the egress slot:
Place one end of a 36.83-cm (14.5-in) grounding strap over the grounding lug on the fan kit.
1.
Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the fan kit and
2.
tighten.
Place the other end of the same grounding strap over the grounding lug on the egress slot.
3.
Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the egress slot
4.
and tighten.
Ground Bonding kit 68