Clean The Glass Platen And The Reference Roller Of The Scanner - Oce TDS320 User Manual

Clean the glass platen and the reference
roller of the scanner
If the glass platen of the scanner is dirty or static, it should be cleaned to ensure
top quality copies are produced. At the same time you can clean the white
reference roller.
Attention:
sensors on the scanner
▼
How to clean the glass platen and reference roller
Switch off the scanner.
1
Unlock the top cover by pushing the front side of the cover down and pulling
2
it towards.
[55] Open the top cover of the scanner
Raise the cover (see figure 56 on page 121).
3
Clean the glass platen and the white pressure platen gently with a soft cloth
4
moistened with a small quantity "Cleaner A".
For safety information see the safety data sheet in Appendix B.
120 Océ TDS320 User Manual
When you clean the reference roller, be careful not to damage the