Manual Feed - Oce TDS320 User Manual

Manual feed

There are two possibilities to select manual feed:
via remote control commands added to the print file (by means of drivers).
■
choose 'manual feed' on the scanner operator panel.
■
[6] Manual feed
If you want to use manual feed, you must:
program the media settings (material and feed time out) on the printer
1
send the file
2
feed the sheet of material
3
hold the material until the printer pulls in the first part of the material.
4
If you select manual feed, the printer will inform you to feed the sheet into the
printer. There is a time out between 1 and 10 minutes. Default is 1 minute.
▼
Set the time-out for manual feed
Default is 1 minute.
Press On-line to put the printer off-line.
1
Select the 'Media settings' item with the
2
Press Next/select to enter the 'Media settings' menu.
3
Select 'Manual feed' with the
4
Press Next/select to enter the 'Manual feed' menu.
5
Select the 'Time out' with the
6
Press Next/select to enter the 'Time out' menu.
7
Select the desired time out with the
8
Press Next/select to confirm the selected time-out.
9
Press On-line to put the printer on-line again.
10
Use the Océ TDS320 to print
or key.
or key.
or key.
or key.
25