Océ Scan Manager - Oce TDS320 User Manual

Océ Scan Manager
The Océ Scan Manager is an application available locally on the controller.
With the Océ Scan Manager you can configure the destinations for Océ Scan
Logic®. To increase your productivity you can define automatic file naming.
This way you can do batch scans without operating the controller.
During scanning, Océ Scan Manager displays the filename and the status of the
file generation process. When the scan is completed a view of the scanned
image is automatically displayed on the controller.
Figure 16 shows an example of the Océ Scan Manager application. The left
part displays a tree view containing folders containing destinations. The right
part displays a table view containing the content of the folder currently
selected.
[16] Overview of the Océ Scan Manager application
Not all options are available to all users. You must log on to a particular
Note:
user mode to do specific tasks with Océ Scan Manager (see 'Océ TDS320
users' on page 13).
Use the Océ TDS320 to Scan to file 67