Configuration
Select a language
On the operator panel of the Océ TDS320 Printer you can indicate which
language you use to display the printer information, like status and error
messages.
▼
Select a language
Press the On-line key to put the printer off-line.
1
Select the 'Configuration' item with the
2
Press Next/select to enter the 'Configuration' menu.
3
Select 'Language' with the
4
Press Next/select to enter the 'Language' menu.
5
Select the desired language with the
6
Press Next/select to confirm the selected language.
7
Press On-line to put the printer on-line again.
8
Turn the printer 'off' and 'on' again.
9
Network settings
The Océ TDS320 has 2 network adapters. To set the network settings you must
enter the network data in 4 fields.
Use DHCP server. The Dynamic Host Configuration Protocol (DHCP) i s a
■
protocol to a u tom a te the a ssi g n m en t of I n tern et Protocol ( I P) a ddresses i n a
n etw ork . W i thou t DHCP , the I P a ddress m u st be en tered m a n u a l l y.
IP address. An IP address has two parts: one part identifies the network (with
■
the network number) and the other part identifies the specific machine or host
within the network (with the host number).
Subnetmask. A subnet (short for 'subnet work') is an identifiably separate
■
part of an organization's network. To manage routing that could and should
be handled within an organization.
Set default gateway A g a tew a y i s a n etw ork poi n t tha t a cts a s a n en tra n ce to
■
a n other n etw ork .
Enter the following 'password' (key sequence) to get access to the System
menu on the printer to set the network settings.
Use the Océ TDS320 to print
or
key.
or
key.
or
key.
29