▼
Start Océ Settings Editor on a remote workstation
You must first install Océ Remote Logic® as described in
Note:
'Installation procedure for MS Windows® systems' on page 85.
Select 'Océ Remote Logic®' via the 'Start' menu.
1
Select the 'Launcher' application.
2
Select Océ Settings Editor. Océ Settings Editor starts.
3
How to perform actions from the Océ Settings Editor
You can perform a number of activities from the Océ Settings Editor. These
activities include:
Save settings to file
■
Load settings from a file
■
Save and load settings
can be saved in a file or loaded from a file. This way you can have different
settings for different customers, departments or other situations.
These settings can only be saved in Key Operator or System
Note:
Administrator mode.
▼
Save settings to file
Open the 'File' menu and select 'Save as'.
1
You now have two possibilities:
If the client is a local client, a dialog is displayed and the user can supply a
■
file name. The file is saved in a predefined directory on the system.
If the client is a remote client, a dialog box is displayed and the user can
■
supply a directory and a file name.
All settings in the current view mode are saved; not only the ones that
Note:
are currently visible.
A few special files are available here:
Default.kos/Default.sas
■
These files contain the factory default settings for the Key Operator and
System Administrator, respectively, and cannot be changed.
Backup.kos/Backup.sas
■
These files contain a previous version of the settings for the Key Operator
and System Administrator, respectively (before the last Apply).
Current.kos/Current.sas
■
These files contain the version of the settings for the Key Operator and
System Administrator after the last Apply.
104
Océ TDS320 User Manual
All Key Operator and System Administrator settings