Select The Use Of Roll 1 Or Roll 2 Or Manual Feed - Oce TDS320 User Manual

▼
Select the number of copies
Enter the number of copies (1 up to 99) with the '+' or '-' key on the scanner
1
operator panel.
The display shows the number of copies.

Select the use of roll 1 or roll 2 or manual feed

You can select between two rolls or manual feed with the 'media' key. When
a roll is selected, the copy material is taken from the selected roll.
Only use paper as specified in 'List of available material types and sizes'
Note:
on page 139.
▼
Select roll 1, roll 2
Press the 'media' key until the indicator that matches your selection lights up.
1
Enter the media width if you have selected 'Manual feed' (see 'Media type and
2
size on the printer' on page 23).
Set the correct media type settings (see 'Set the media type settings' on
3
page 24).
Press the confirm key.
4
46 Océ TDS320 User Manual