Settings To Scan; Destination - Oce TDS320 User Manual

Settings to scan

Press the Extra key on the scanner operator panel to access the settings to make
a scan. The following options are available in the 'File' menu:

Destination

controller or you can store it on a network destination. You can define a
maximum of six destinations in the Scan Manager application. You can select
one of these destinations on the scanner operator panel.
Checkprint
checkprint on or off.
File resolution
resolutions: 200, 300 or 400 dots per inch (DPI). The higher the resolution, the
better the image quality. Higher resolution also causes larger sizes of files.
File format
TIFF (Tagged Image File Format), CALS-I (Continuous Acquisition and Life
Cycle support), or PDF (Portable Document Format).
Optimize size
quality.
Set the scan size In the 'Original' menu.
Destination
You can store your scan either in the temporary store on the controller or on a
network destination. You can define up to six destinations in the Océ Scan
Manager application. On the scanner operator panel you can choose one of
these destinations.
▼
Select a destination
Press the Extra key.
1
Select 'Destination' with the
2
Press the
3
Select the needed 'Destination' with the
4
Press the Confirm key.
5
62 Océ TDS320 User Manual
You can store your scan either in the temporary storage on the
A Checkprint is a print from the scanned original. You can turn the
The Océ TDS320 Scan Logic® option can scan three
To define the internal order of the scanned files, select between
Select this option to decrease the size of the file or to get good
key, to enter the 'Destination' menu.
or key.
or key.