Attention:
the functions of the system cannot operate. When the security level is set to
Standard, all Océ Power Logic® features are available.
When you increase the security level to Medium, the following features are not
available.
Scan to file to remote destinations
■
Océ Remote Logic
■
Printing through Novell Pserver
■
Various network connectivity protocols.
■
When you increase the security level to High, the following features are not
available.
Scan to file to remote destinations
■
Océ Remote Logic
■
Printing through FTP (File Transfer Protocol)
■
Printing through Novell Pserver
■
Various network connectivity protocols.
■
Please contact your local Océ Service organization for complete
Note:
information.
Océ Remote Logic
Controller from a remote workstation.
Océ Settings Editor
settings of the Océ TDS320 according to your companies requirements.
Refer to 'Océ Power Logic®: The Settings Editor' on page 95, for complete
information about the Océ Settings Editor application.
Océ TDS320 options
By default, the Océ TDS320 has an automatic 1 roll unit and is equipped with
a receiving tray as the output delivery device. The receiving tray is the rack on
the bottom of the printer (see figure 1 on page 12).
Automatic 2-roll unit
unit. Each of the rolls can be loaded with print material of a different size or
Introduction
When you increase the security level to Medium or High, some of
®
®
®
enables you to connect to the Océ Power Logic
The Océ Settings Editor allows you to set the default
The Océ TDS320 is available with an automatic 2-roll
®
11