[46] Feed the material
If you have inserted a roll with another material or with a different width, you
9
have to program the correct width and material type (refer to 'Media type and
size on the printer' on page 23).
If you want to cut the paper to get a straight leading strip refer to 'Cut media'
on page 26.
Otherwise continue with the next step.
Close the drawer.
10
Press the On-line key.
11
▼
How to load roll 2
Open the cover to get access to roll 2 (see figure 47).
1
[47] Open the lower paper drawer
Remove the roll holder (see figure 48).
2
Printer supplies and maintenance
113