Key Operator Settings - Oce TDS320 User Manual

Key Operator settings

The Key Operator is responsible for correct default settings of the system.
These settings include the default settings, and groups of default printer
settings for the print and the copy jobs that again occur.
The Key Operator can define all timer settings, like the panel time out and the
sleep mode time out.
One Key Operator or System Administrator can log on to the Océ
Note:
Settings Editor at the same time.
In order to perform special Key Operator functions, you must log on to the Océ
Setti n g s Edi tor as a Key Operator.
As these functions are restricted to a dedicated Key Operator, a password is
required to access them. The service engineer will provide this password to
you upon installation.
When you are finished, make certain you log off from the K ey Opera tor
Note:
m ode of the Océ Setti n g s Edi tor to prevent unauthorized use of the Océ
TDS320.
▼
Make Key Operator settings in the Océ Settings Editor
maximize the Océ Settings Editor on the screen.
1
Log on as Key Operator.
2
Click on one of the top buttons to display the desired group of settings.
3
Select the setting you want to update in the tree structure.
4
Update the setting in the update area, as required.
5
A few settings are made directly from the tree structure area.
Note:
Click on the 'Apply' button.
6
The new value is now applied for the setting
Log from the Key Operator mode when you have finished updating the
settings.
106 Océ TDS320 User Manual