Select The Input Mode; To Copy Sets - Oce TDS320 User Manual

Select the input mode

You can use the 'Input' setting to indicate how a job is sorted: the 'sheet'
option prepares each sheet as a separate job (see figure 11).
Select 'set' to keep the copies together and to prevent the interruption with a
print job. 'set' makes a copy for each sheet in a set and continues with the next
copy of the complete set (see figure 11).
:
Output with the input mode 'sheet'
[11] Difference between the 'sheet' option and the 'set' option
▼
Select the input mode
Press the 'input' key to select the input mode 'sheet' or 'set'.
1
The selected indicator lights up.

To copy sets

Use the input mode 'set' to copy sets of originals. The originals will be scanned
sheet by sheet and the image information will be stored in memory. When you
press the Start key to close the set the printer prints the output.
▼
How to copy sets
Press the 'input' key to select the input mode 'set'.
1
Insert an original.
2
Add the originals to the set and press the Start key
3
After the last scan of the set, remove the original and press the Start key
4
close the set.
Use the Océ TDS320 to copy
Print 3 copies of a 3 - page document
page 3
page 3
page 3
page 2
page 2
page 2
page 1
page 1
page 1
page 3
page 2
page 1
page 3
page 2
page 1
page 3
page 2
page 1
Output with the input mode 'set'.
.
to
47