Displaying and Maintaining RADIUS
To do...
Display the configuration
information of a specified
RADIUS scheme or all RADIUS
schemes
Display statistics about RADIUS
packets
Display information about
buffered stop-accounting
requests that get no responses
Clear RADIUS statistics
Clear buffered stop-accounting
requests that get no responses
Configuring HWTACACS
Different from RADIUS, except for deleting HWTACACS schemes and changing the IP addresses of
the HWTACACS servers, you can make any changes to HWTACACS parameters, whether there are
users online or not.
Creating a HWTACACS scheme
The HWTACACS protocol is configured on a per scheme basis. Before performing other HWTACACS
configurations, follow these steps to create a HWTACACS scheme and enter HWTACACS scheme
view:
To do...
Enter system view
Create a HWTACACS scheme
and enter HWTACACS scheme
view
Use the command...
display radius scheme
[ radius-scheme-name ]
display radius statistics
display stop-accounting-buffer
{ radius-scheme
radius-server-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
reset radius statistics
reset stop-accounting-buffer
{ radius-scheme
radius-server-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
1-31
Remarks
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view
Remarks
—
Required
Not defined by default