Configuring The Userloginwithoui Mode - 3Com 4500G Family Configuration Manual

MAC Addr: 0.2.0.0.0.21
VLAN ID: 1
IfAdminStatus: 1
In addition, you will see that the port security feature has disabled the port if you issue the following
command:
[Switch-GigabitEthernet1/0/1] display interface gigabitethernet 1/0/1
GigabitEthernet1/0/1 current state:
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-cb00-5558
Description: GigabitEthernet1/0/1 Interface
......
The port should be re-enabled 30 seconds later.
[Switch-GigabitEthernet1/0/1] display interface gigabitethernet 1/0/1
GigabitEthernet1/0/1 current state: UP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-cb00-5558
Description: GigabitEthernet1/0/1 Interface
......
Now, if you manually delete several secure MAC addresses, the port security mode of the port will be
restored to autoLearn, and the port will be able to learn MAC addresses again.

Configuring the userLoginWithOUI Mode

Network requirements
The client is connected to the switch through port GigabitEthernet 1/0/1. The switch authenticates the
client by the RADIUS server. If the authentication succeeds, the client is authorized to access the
Internet.
RADIUS server 192.168.1.2 functions as the primary authentication server and the secondary
accounting server, and RADIUS server 192.168.1.3 functions as the secondary authentication
server and the primary accounting server. The shared key for authentication is name, and that for
accounting is money.
All users use the default authentication, authorization, and accounting methods of ISP domain sun,
which can accommodate up to 30 users.
The RADIUS server response timeout time is five seconds and the maximum number of RADIUS
packet retransmission attempts is five. The switch sends real-time accounting packets to the
RADIUS server at an interval of 15 minutes, and sends user names without domain names to the
RADIUS server.
Restrict port GigabitEthernet 1/0/1 of the switch as follows:
Allow only one 802.1X user to be authenticated.
Allow up to 16 OUI values to be configured and allow one additional user whose MAC address has
an OUI among the configured ones to access the port.
Port Security Disabled
1-13