3Com 4500G Family Configuration Manual page 908

Configuration
configuration
Check mode
Stop bits
Data bits
Define a shortcut
key for terminating
tasks.
Configure the type
of terminal display
under the current
user interface.
Configure the
command level
available to the
users logging in to
the AUX user
interface
Set the maximum
number of lines the
screen can contain
Set history
command buffer
size
Set the timeout
time of a user
interface
Changing of Console port configuration terminates the connection to the Console port. To establish the
connection again, you need to modify the configuration of the termination emulation utility running on
your PC accordingly. Refer to
parity { even | mark |
none | odd | space }
stopbits { 1 | 1.5 | 2 }
databits { 5 | 6 | 7 | 8 }
escape-key { default |
character }
terminal type { ansi |
vt100 }
user privilege level level
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
Setting Up the Connection to the Console Port
2-4
Description
Optional
By default, the check mode of
the Console port is set to
"none", which means no check
bit.
Optional
The default stop bits of a
Console port is 1.
Optional
The default data bits of a
Console port is 8.
Optional
By default, you can use Ctrl+C
to terminate a task.
Optional
By default, the terminal display
type is ANSI.
Optional
By default, commands of level 3
are available to the users
logging in to the AUX user
interface.
Optional
By default, the screen can
contain up to 24 lines.
Optional
By default, the history
command buffer can contain up
to 10 commands.
Optional
The default timeout time is 10
minutes.
for details.