Displaying And Maintaining Bootp Client Configuration; Bootp Client Configuration Example - 3Com 4500G Family Configuration Manual

24/48 port
Hide thumbs Also See for 4500G Family:
Table of Contents

Advertisement

Displaying and Maintaining BOOTP Client Configuration

To do...
Display related information on a
BOOTP client

BOOTP Client Configuration Example

Network requirement
As shown in
Figure
1 obtains an IP address from the DHCP server by using BOOTP.
Figure 5-1 Network diagram for BOOTP
Client
10.1.1.126/25
Gateway A
10.1.1.2/25
DNS server
Configuration procedure
The following describes only the configuration on Switch B serving as a client.
# Configure VLAN-interface 1 to dynamically obtain an IP address from the DHCP server.
<SwitchB> system-view
[SwitchB] interface vlan-interface 1
[SwitchB-Vlan-interface1] ip address bootp-alloc
Use the command...
display bootp client [ interface
interface-type interface-number ]
5-1, Switch B's port belonging to VLAN 1 is connected to the LAN. VLAN-interface
WINS server
10.1.1.4/25
Vlan-int1
10.1.1.1/25
DHCP server
Vlan-int1
Switch B
Client
5-3
Remarks
Available in any view

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents