Associating The Https Service With An Ssl Server Policy; Enabling The Https Service - 3Com 4500G Family Configuration Manual

Associating the HTTPS Service with an SSL Server Policy

You need to associate the HTTPS service with a created SSL server policy before enabling the HTTPS
service.
Follow these steps to associate the HTTPS service with an SSL server policy:
To do...
Enter system view
Associate the HTTPS service with
an SSL server policy
If the ip https ssl-server-policy command is executed repeatedly, the HTTPS service is only
associated with the last specified SSL server policy.
When the HTTPS service is disabled, the association between the HTTPS service and the SSL
server is automatically removed. To enable it again, you need to re-associate the HTTPS service
with an SSL server policy.
When the HTTPS service is enabled, no modification of its associated SSL server policy takes
effect.

Enabling the HTTPS Service

The device can act as the HTTPS server and users can access and control the device through the Web
function only when the HTTPS service is enabled.
Follow these steps to enable the HTTPS service:
To do...
Enter system view
Enable the HTTPS service
Use the command...
system-view
ip https ssl-server-policy
policy-name
Use the command...
system-view
ip https enable
2-2
Remarks
—
Required
Not associated by default
Remarks
—
Required
Disabled by default.