Device And Operator Actions For Equipment Errors - Fujitsu M3099EX Reference Manual

Device and Operator Actions for Equipment Errors

If an equipment error is detected in the scanner, the (Check) lamp at the operator panel lights.
HOPPER ALARM
TRANSPORT ALARM
LAMP ALARM 1
LAMP ALARM 2
HEATER ALARM 1
HEATER ALARM 2
CCD UNIT ALARM 1
CCD UNIT ALARM 2
TEMP. ALARM
FUSE ALARM PRINT *
RAM ALARM PRINT *
TIME-OUT ALARM PRINT *
HARDWARE ALARM
PROGRAM. ALARM **
Check if the lamp or heater is attached correctly. Replace
lamp according to the replacement method. If turning the
power on again does not recover the scanner, contact the
manufacturer's authorized service center.
If turning the power on again does not recover the scanner,
contact the manufacturer's authorized service center.
* Endorser option only
** Check if the terminator is installed (M3099GX/GH).
5-13