Color Balance Adjustment - Xerox phaser 2135 Advanced Features And Troubleshooting Manual

Adjusting Color Density and Balance
2. Press Item Up or Item Down (labeled 2 and 6) until you see:
3. Press Value Up or Value Down (labeled 3 and 7) until the Value is equal to the
number of the square identified in step 1.
4. Press Enter (labeled 4). The Color Adjust Page prints showing you the changes that
resulted from the previous steps and the front panel displays:
5. Repeat Steps 3 and 4 above until the bar and background patterns in the Current (0)
square blend together.

Color Balance Adjustment

1. Identify the numbered circle that most closely matches the gray of the background. If
this square is the Current (0) square, no adjustment is needed. Continue to Color
Density Adjustment.
2. Press Item Up or Item Down (labeled 2 and 6) until you see:
3. Press Value Up or Value Down (labeled 3 and 7) until you see the number of the
circle that you identified in step 1.
4. Press Enter (labeled 4). The Color Adjust Page prints showing you the changes that
resulted from the previous steps and the front panel displays:
5. Repeat Steps 3 and 4 above until the bar and background patterns in the Current (0)
square blend together.
74
Color Adjust Menu
Black Density
Black Density =
New Value
Color Adjust Menu
Black Density
Color Adjust
Color Balance
Color Balance =
New Value
Color Adjust Menu
Color Density
Phaser 2135 Color Printer